When buying a new compressor, most people pay attention to what it can do for a good reason. However, after you choose a compressor, it is time to put it in place. Much thought goes into selecting a compressor, but many people do not think about problems that might come up during installation. Here are quick tips to make industrial air compressor installation easier.
Size and Type of Compressor
There are a few easy steps before the industrial air compressor installation can start. The first step is to figure out what size and type of compressor will work best for the site, considering both current and future needs. In this case, hiring a professional compressed air consultant is essential. An audit should be done from the air to determine what the site needs. After this is done and the compressors are bought, planning the installation becomes a crucial step.
Make Sure Your Compressor Has Access To Power
This may seem obvious, but it is an essential part of an installation. Whether you put your compressor in a separate room or near where it will be used, it will need electricity. Depending on your system, you might have a compressor that plugs in or needs special wiring. If the point of connection is far away, you will need wires that can reach it without adding too much electrical resistance. There are other things to think about when it comes to electricity, so work with a professional engineer to ensure your system is ready.
Measure Your Floor Space And Doorways
Even though this may seem obvious, you do not want a compressor that does not fit in your building. Make sure you measure the space where you want to put the compressor and compare it to the footprint of the compressor. Same thing with doorways. It does not happen often, but some large compressors may not be able to fit through small doorways.
Proper Intake of Air and Ventilation
You have made sure that your compressor can get power and that it will fit, where you want it. You also need to ensure that the compressor is getting enough air and room to breathe. The compressor can take in air from the air around it or ducts. If the compressor pulls air from the room, it is in, and it is essential to ensure the room has enough airflow. Compressors make heat, so if cooler air does not come in, the compressor will draw in more and more hot air, which can cause it to overheat. If the compressor is in a small room without ventilation, negative pressure can build up, making it hard to open the door to the compressor room.
Because of the risks that could happen if air compressors aren’t set up correctly, it’s best to do the job right the first time. Use this quick guide to help you with everything you need to do with industrial air compressor installation.
A significant investment for your business is an air compressor. By using these tips and getting help from experts right away, you can help make sure that your air compressor is set up correctly. Plan to keep your system running at its best for many years.