The concrete driveway is one of the first things that people might notice while they pull over to your house. So, if the driveway is stained and dirty, it might affect the curb appeal of your place. The driveway mostly gets exposed to so many sources of stains and dirt, right from leaky vehicles to falling leaves. Regular cleaning, taking place at least once every year might help in getting rid of the debris before it got settles in. The best way for you to clean the driveway is by starting with the gentle method and then work up to the stronger cleaners if you are in need.
The basics to cover:
The present bumpy surface of the concrete helps in creating lots of little spots for decomposing leaves, dirt, and some other gunk to stick and settle. Washing your concrete driveways in hills district on a daily basis might prevent these things from just building up in crevices. Concrete can also be stated as a slightly porous surface region. It means that if anything is spilled on the driveway, it can get soaked inside concrete instantly, which will cause one deeper stain. It is important to wash driveways on a regular basis for maintaining the curb appeal. Whenever spills take place, mainly of motor vehicle leaks, you need to tackle them well before liquid settles into concrete and get to stain them.
Proper use of soap and water:
For that general cleaning, a simple cleaner for concrete driveways in hills district can be made by using water and soap in proper ratios. All you have to do is put few squirts of the disk soap into a large bucket and then fill it up to water. Then you have to drip one stiff scrub brush into that soapy water and then scrub driveways in circular motions. Then you need to start by the back of the driveway and then work towards the street so that the water can easily run off the driveway with slope. Make sure to rinse the water from concrete with a garden hose so it will not leave any remaining dirt or spot.
Understand the value of power washing:
The higher pressure of washer will effectively help in cleaning stains and debris from concrete driveways. Fan tip can work best on any concrete driveway. Hot water can always help in improving the cleaning power of that of a pressure washer. Make sure to set power washer on low setting, which will not exceed 2500 psi. You can start the cleaning of concrete driveways in hills district right at the back of the driveway and then hold water at least 12 inches from surface. Make sure to move the wand from one side to another for leaning driveway.
Use them with caution:
Always remember that power washer is dangerous to use, so you have to work out on them with caution. Never try to point that power washer want at any person or it might cause some unwanted injuries. Just try to avoid holding the power washer just in one spot for more than 10 seconds or you might damage the concrete.